D34 HIRE BUSH HAMMER HEAD FITS TO SELECTIVE DFG GRINDER
This attachment when fitted to our range of DFG grinders has 5 heads fitted that can remove most surface laitance from concrete and leave it keyed for new coating or if further stages of diamond polishing are needed due to the full exposure of the aggregate.It Leaves the surface similar to a milled or shot-blasted surface.
This should not be used for any adhesive or sticky residue although can be used on some asphalt, not tarmac surfaces, and not suitable for resin removals.
normally used on the dfg250 petrol grinder as this link below
| Power | N/A |
|---|---|
| Weight | 5KG |
| Stock No. | D34 |
Additional Items
Additional items that will be required to use this machine are:
There is a wear charge per time of £100.00 and any excessive wear will be charged for or you can by the head complete for £600.00.
Hire Rates
| Day: | 36.00 |
|---|---|
| Weekend: | 48.00 |
| Week: | 60.00 |
Note: any prices or technical details given on these pages are subject to change without prior notice. All prices shown exclude VAT and are subject to availability.
Videos