D35 HIRE FLOOR GRINDER SPE DFG500 TWIN
To successfully grind large floor areas a heavy duty floor grinder is required. The DFG 500 gives complete operator control and at the same time has the correct weight to act directly onto the grinding plates to facilitate accurate and rapid grinding. •500mm (19.7″) working width twin head design •Removeable ballast weights and hydraulic raise/lower facility. CAN BE USED WITH DIAMOND PLATES OR PCD COMBI DISCS, wear charge per mm or if plates worn out charged off instead with no wear charge. machine requires 32amp 415v 3phase 5 pin connect from mains supply or site generator of at least 20kva, ext leads available per 15mtr length up to max 100m total.
|Power:||3 PHASE 415V 32AMP|
additional items that will be required to use this machine are
Note: any prices or technical details given on these pages are subject to change without prior notice. All prices shown exclude VAT and are subject to availability.