D32 HIRE FLOOR GRINDER SINGLE HEAD SPE DFG250 3PHASE

Share On:

  • Facebook
  • Twitter
  • Google+
  • LinkedIn
  • Pinterest

Single head 250 mm suitable for heavy removal of coatings and adhesives adjustable rear axle and removable extra weight. Approx rate of work is 250m2 per day on 3mm of concrete removal or up to 200m2 per day on painted or coated floor with approx 2mm on concrete.

Dust extraction always should be used and range of sizes available at extra cost visit our Dust Control page on the left menu.

Range of diamond plates available for varient surfaces - hard/soft bonded as well as pcd for adhesive and thick coating removal and can be charge at a wear charge per mm or as a sale item if the area is large or the product requires special plates.

This machine is 415v 3phase and requires power supply of 32amp from a 5 pin socket via site supply or generator of at least 20kva, we can supply mains power leads in 15m lengths up to max of 4 leads without power effects.

additional items that will be required to use this machine are

Stock No: D32
Power: 415V 3PHASE 32AMP
Weight: 122 KGS

Additional Items

additional items that will be required to use this machine are

WEAR CHARGE PER MM ON STANDARD GRINDING PLATE £90.00 OR IF PLATE IS WORN OUT £325.00

WEAR CHARGE PER MM ON PCD COMBI PLATE £60.00 OR IF PLATE IS WORN OUT £250.00

Hire Rates

Day: £156.00
Weekend: £208.00
Week: £260.00

Note: any prices or technical details given on these pages are subject to change without prior notice. All prices shown exclude VAT and are subject to availability.